Pack of 2 or 5 XL heart teethers. Sew on silicone all tge same color
DESCRIPTION: Two sided silicone "heart" shaped teether for use in handmade baby and pet toys.
This teether can be frozen and used like a popsicle effect. Must be attached to a blanket or toy for safety.
DIMENSIONS: Approximately 2 7/8 inches wide x 2 3/8 inches tall
See photo for comparison of regular corner teether versus the xl heart teether.
HOW TO USE: This heart teether may be added to toys by sliding open edge over fabric and sewing along the straight edge bottom. If you have a heavy-duty machine, you can sew it on with your machine.
You can also either punch small holes with a tiny awl (I use the one I got with my KAM™ snaps) or by by manually turning the wheel of your machine as you push the teether through underneath the needle. Then, simply use a good, sturdy needle and hand-sew with running stitches to sew on.
CLEANING: While it is recommended to hand wash and lay flat to dry, you can also machine wash the toy on a cold, gentle cycle. A toy washing bag (lingerie washing bag) works great to keep all of the toys and toy edges protected while in a machine. Putting this item in the dryer will greatly decrease the life of the material and it may start to crack over time. NEVER use a heated dry cycle (air fluff only.)
SAFETY: All silicone products in my store are 100% FREE of BPA , PVC, lead, cadmium, and mercury. These items are made from nontoxic EVA and are considered FOOD GRADE SILICONE. These items meet both FDA and EN-71 criteria.
This corner teether is VERY SOFT and flexible. It is made by phase technology for a seamless design.
Please refer to Etsy policy for payment guidelines.
International buyers must provide their shipping address in English.
Flat rate shipping of $5.99. USA shipping only.